Showing posts with label rom. Show all posts
Showing posts with label rom. Show all posts
Thursday, February 5, 2015
Ainol Novo 8 mini Firmware Stock ROM
I uploaded another firmware, this is for Ainol Novo 8 mini. This tablet has a action chip. The tools is already included in the firmware so need to search for it.
First, Download the Firmware Here
Download Here
Newer Board --> Part 1
Newer Board --> Part 2
Newer Board --> Part 3
Newer Board --> Part 4
After Downloading, extract the files and Install Pad Product Tool 1.04. The driver is already included in the Pad Product Tool, so it will automatically install the driver for your device.
After installing the Pad Product Tool. Launch the Pad Product Tool 1.04. It should be located in your Desktop or Go to START > All Programs > Actions Tools > Pad Product Tool
The first time you launch it it will look for the ".fw" extension. Just look inside the firmware folder, or which folder you extracted the firmware. After loading the file just click on replace button.
And then add the system.img, rec.img, system.img. apk.img (see picture for your reference)
And press Down after you connect your tablet in computer. The Down button will be activated after you connect your tablet in the computer. Just a reminder do not exit the problem when it is flashing. This might brick your tablet and rendering it unuseable.
Note: You need to press and hold VOLUME UP when connecting your tablet in your computer.
I hope this tutorial will help you solve your problem. If you have any question just leave a comment below.
Read more »
First, Download the Firmware Here
Download Here
Newer Board --> Part 1
Newer Board --> Part 2
Newer Board --> Part 3
Newer Board --> Part 4
After Downloading, extract the files and Install Pad Product Tool 1.04. The driver is already included in the Pad Product Tool, so it will automatically install the driver for your device.
After installing the Pad Product Tool. Launch the Pad Product Tool 1.04. It should be located in your Desktop or Go to START > All Programs > Actions Tools > Pad Product Tool
The first time you launch it it will look for the ".fw" extension. Just look inside the firmware folder, or which folder you extracted the firmware. After loading the file just click on replace button.
And then add the system.img, rec.img, system.img. apk.img (see picture for your reference)
And press Down after you connect your tablet in computer. The Down button will be activated after you connect your tablet in the computer. Just a reminder do not exit the problem when it is flashing. This might brick your tablet and rendering it unuseable.
Note: You need to press and hold VOLUME UP when connecting your tablet in your computer.
I hope this tutorial will help you solve your problem. If you have any question just leave a comment below.
Wednesday, February 4, 2015
Cherry Mobile Flare S3 stock rom firmware to unbrick your phone
Hi,
This is my personal back up of Cherry Mobile Flare S3 ROM, the firmware or ROM is already Rooted with CWM installed when you are going to flash your phone. The version of this firmwre is v1.03. When flashing use the latest version of SPFlashtool.
Although some of my tutorial are from version SPFlashtool version 3.xxx, the procedure is still the same because the SPFlashtool that you are going to use is version 5.xxxx
You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Flare S3 v1.03
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Reference Video using Driver Auto Installer (watch in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Flashing your phone (please watch in HD)
Flashing
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.If you encounter PMT_Changed error here is what you do:In Older Version of FlashTool
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Read more »
This is my personal back up of Cherry Mobile Flare S3 ROM, the firmware or ROM is already Rooted with CWM installed when you are going to flash your phone. The version of this firmwre is v1.03. When flashing use the latest version of SPFlashtool.
Although some of my tutorial are from version SPFlashtool version 3.xxx, the procedure is still the same because the SPFlashtool that you are going to use is version 5.xxxx
You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Flare S3 v1.03
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
Installing Driver
First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.
Reference Video using Driver Auto Installer (watch in HD)
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
Video Flashing your phone (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download is not possible, you can press Firmware Upgrade.
5. After you press Download or Firmware Upgrade re-insert your battery and connect your Phone to the PC. Press Volume Down or Volume Up while connecting to PC.
Some workarounds:
Load the scatter fileClick in Format (a new menu will popup)Make sure that you select Format whole flash except bootloader then press OKConnect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)It should detect your phone and continue to flash.Then Click Download to fully flash your phone.Hard Reset your phone after flashing.
- Load the scatter file
- Choose Format + Download (Underneath Scatter-loading file)
- Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
"Hard reset your phone after flashing"
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Subscribe to:
Posts (Atom)